It is very dangerous to burst the cutting blade in use. I think it is necessary to talk with you, so that you can avoid this situation as far as possible in the future use process, and waste less unnecessary time to avoid some potential safety hazards.
The main reasons leading to the rupture of the cutting piece are as follows:
1. The quality problems of the cutting blade itself, such as poor flatness of the cutting blade, uneven structure of the cutting blade, high hardness of the cutting blade, lack of toughness of the cutting resin.
2. The operation method is incorrect, for example, the linear speed of the cutting blade is only 72m/s, while the operator installs the cutting blade on the cutting machine whose linear speed reaches 80m/s.
3. Carelessly, the cutting piece to be installed to idle (that is, no workpiece running) for a minute, this process can detect the quality of the cutting piece and cutting hole diameter and cutting table shaft is equipped with.
4. Before use, the cutting blade has experienced a more serious collision. Although it is more complete from the surface, its internal structure has been damaged, and such cutting blade is more likely to break when working.
So we must choose the cutting blade of good quality when choosing the cutting blade, poor quality cutting blade is more likely to cause security risks, and the cutting blade is recommended to purchase nearby.
